252
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.18 J5-CHP07-10P cabinet-mounting attachment
Fitting method
Install the attachment onto the servo amplifier before installing the servo amplifier into the cabinet.
*1 Use one of the flat head screws included with the attachment. (Tightening torque: 1.2 [N•m])
Installation precautions
Ensure that the attachment is installed perfectly straight so that it does not protrude beyond the side of the module.
If the attachment is not straight, the hole in the bracket may not alight with the screw hole.
The attachment may come loose if it is installed at an angle and then forcibly moved into position. Loosen the screw before
adjusting the position of the attachment.
Cabinet-mounting attachment
Install the cabinet-mounting attachment perfectly straight so that
it does not protrude beyond the side of the module.
To Next Page
Loading...
