6 OPTIONS AND PERIPHERAL EQUIPMENT
6.19 J5-CHP08 grounding terminal attachment
257
6
6.19 J5-CHP08 grounding terminal attachment
Using the grounding terminal attachment allows wiring of the grounding terminal on the front of the servo amplifier. It also
allows the cable to be secured to the front of the servo amplifier.
Ensure that the cable does not apply excessive stress to the attachment.
Compatible models
• MR-J5-10_ to MR-J5-350_
Restrictions
• The grounding terminal attachment cannot be installed when the MR-BAT6V1SET or MR-BAT6V1SET-A batteries are
used.
• Remove the cable clamp before removing the CN2L connector.
Appearance and dimensions
Appearance
• Without cable clamp
• With cable clamp
Material: SPHC-P
Plating: Trivalent chrome plated
Screws for cable clamp
(main circuit/motor power cable)
Screws for protective earth
To Next Page
Loading...
