2
[Installation/wiring]
[Setting/adjustment]
[Operation]
[Maintenance]
WARNING
● To prevent an electric shock, turn off the power and wait for 15 minutes or more before starting wiring
and/or inspection.
● To prevent an electric shock, ground the servo amplifier.
● To prevent an electric shock, any person who is involved in wiring should be fully competent to do the
work.
● To prevent an electric shock, mount the servo amplifier before wiring.
● To prevent an electric shock, connect the protective earth (PE) terminal of the servo amplifier to the
protective earth (PE) of the cabinet, then connect the grounding lead wire to the ground.
● To prevent an electric shock, do not touch the conductive parts.
WARNING
● To prevent an electric shock, do not operate the switches with wet hands.
WARNING
● To prevent an electric shock, do not operate the switches with wet hands.
WARNING
● To prevent an electric shock, any person who is involved in inspection should be fully competent to do
the work.
● To prevent an electric shock, do not operate the switches with wet hands.
To Next Page
Loading...
