12
GENERIC TERMS AND ABBREVIATIONS
Unless otherwise specified, this manual uses the following generic terms and abbreviations.
Generic term/abbreviation Description
A/D converter module An abbreviation for the CC-Link IE TSN analog-digital converter module
CC-Link IE TSN remote module A generic term for an A/D converter module, a D/A converter module, an I/O module
D/A converter module An abbreviation for the CC-Link IE TSN digital-analog converter module
I/O combined module A generic term for modules that can input and output a digital signal
I/O combined module (except for
waterproof module)
A generic term for modules except for waterproof/dustproof modules that can input and output a digital signal
I/O combined module (waterproof
module)
A generic term for waterproof/dustproof modules that can input and output a digital signal
I/O module An abbreviation for the CC-Link IE TSN remote I/O module
I/O module (except for waterproof
module)
An abbreviation for the CC-Link IE TSN remote I/O module that is not waterproof or dustproof
I/O module (waterproof module) An abbreviation for the CC-Link IE TSN waterproof/dustproof remote I/O module
Input module A generic term for modules that can input a digital signal
Input module (except for waterproof
module)
A generic term for modules except for waterproof/dustproof modules that can input a digital signal
Input module (waterproof module) A generic term for waterproof/dustproof modules that can input a digital signal
Output module A generic term for modules that can output a digital signal
Output module (except for
waterproof module)
A generic term for modules except for waterproof/dustproof modules that can output a digital signal
Output module (waterproof module) A generic term for waterproof/dustproof modules that can output a digital signal
RWr An abbreviation for the remote register of link device. RWr refers to word data input from a slave station to the master
station (For some areas in a local station, data are input in the opposite direction.)
RWw An abbreviation for the remote register of link device. RWw refers to word data output from the master station to a slave
station (For some areas in a local station, data are output in the opposite direction.)
RX An abbreviation for remote input of link device. Bit data input from a slave station to the master station (For some areas
in a local station, data are input in the opposite direction.)
RY An abbreviation for remote output of link device. Bit data output from the master station to a slave station (For some
areas in a local station, data are output in the opposite direction.)
To Next Page
Loading...
