8 FUNCTIONS
8.3 CC-Link IE TSN Network Synchronous Communication Function
159
8
Synchronous X/Y control mode
Controls I/O by turning on and off the remote input signal and the remote output signal.
An I/O module operating in the synchronous X/Y control mode acquires an input signal at each synchronization cycle, and
changes the output signal.
Using the synchronous X/Y control mode enables I/O modules to match an input signal acquisition timing or an output signal
change timing between them.
The synchronous X/Y control mode has the following two types.
• Synchronous X input control ( Page 160 Synchronous X input control)
• Synchronous Y output control ( Page 160 Synchronous Y output control)
(1) RJ71GN11-T2
(2) Station No.1 input module
(3) Station No.2 input module
(4) Station No.3 output module
(5) Station No.4 output module
(6) Station No.5 output module
(7) Synchronizing input acquisition timings
(8) Synchronization cycle
(9) Synchronizing output change timings
(1)
(2)
(3)
(4)
(6)
(5)
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
(7)
(9)
(8)
Output of station No.5
Input of station No.1
Input of station No.2
Output of station No.3
Output of station No.4
To Next Page
Loading...
