Mitsubishi Electric NZ2GN2S1-16D - Appendix 3 CC-Link IE TSN Processing Time

APPX
Appendix 3 CC-Link IE TSN Processing Time
245
A
Appendix 3 CC-Link IE TSN Processing Time
Processing time of the I/O module
■Input reflection processing time of slave station (input)
The input reflection processing time of the slave station (input) = Input response time
*1
+ Internal processing time
*1 If the input response time is "0ms", use 0.16ms for calculation.
■Output reflection processing time of slave station (output)
The output reflection processing time of the slave station (output) = Output response time + Internal processing time
For details on output response time, refer to the following.
Page 47 Output module, Page 80 I/O combined module
■Internal processing time
Calculate the above by referring to the internal processing time of the I/O module listed below.
Model Internal processing time
For input For output
NZ2GN2S1-16D, NZ2GN2S1-32D, NZ2GN2B1-16D, NZ2GN2B1-32D,
NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GN12A4-16D, NZ2GN12A4-16DE,
NZ2GN2S1-16T, NZ2GN2S1-32T, NZ2GN2B1-16T, NZ2GN2B1-32T, NZ2GNCF1-
32T, NZ2GN12A2-16T, NZ2GN2S1-16TE, NZ2GN2S1-32TE, NZ2GN2B1-16TE,
NZ2GN2B1-32TE, NZ2GN12A2-16TE, NZ2GN2S1-32DT, NZ2GN2B1-32DT,
NZ2GNCE3-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
0ms 0ms
NZ2GN12A42-16DT, NZ2GN12A42-16DTE 0ms 0.1ms