8 FUNCTIONS
8.9 Firmware Update Function
179
8
8.9 Firmware Update Function
This function updates the firmware of the I/O module via CC-Link IE TSN.
Update the firmware by using the CC-Link IE TSN Firmware Update Tool.
When the CC-Link IE TSN Firmware Update Tool is necessary, please consult your local Mitsubishi representative.
System configuration
Connect a personal computer and the I/O modules that are the firmware update targets with an Ethernet cable.
Firmware update file
When the firmware update file is necessary, please consult your local Mitsubishi representative.
The file name of the firmware update file is as follows.
If a file of the firmware version that cannot be used for updating the target I/O module is specified, a firmware
version error (error information: 0010H) occurs.
(1) Firmware update target I/O modules
Model File name Firmware version
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GNCF1-32D, NZ2GNCE3-32D, NZ2GN2S1-32T,
NZ2GN2B1-32T, NZ2GNCF1-32T, NZ2GN2S1-32TE, NZ2GN2B1-32TE, NZ2GN2S1-32DT,
NZ2GN2B1-32DT, NZ2GNCE3-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE
CCIET_DIO.SYF "01" or later
NZ2GN2S1-16D, NZ2GN2B1-16D, NZ2GN12A4-16D, NZ2GN12A4-16DE, NZ2GN2S1-16T,
NZ2GN2B1-16T, NZ2GN12A2-16T, NZ2GN2S1-16TE, NZ2GN2B1-16TE, NZ2GN12A2-16TE,
NZ2GN12A42-16DT, NZ2GN12A42-16DTE
"05" or later
To Next Page
Loading...
