168
8 FUNCTIONS
8.3 CC-Link IE TSN Network Synchronous Communication Function
Output time setting control
With this function, the output is controlled to turn on or off according to a preset time. The output turns on or off according to a
value set in ON/OFF selection flag (RWw4, RWw5).
Set the following for the I/O module.
• Output time setting Y (RWw10 to RWw8F): Set a time to turn on or off the output here.
• ON/OFF selection flag (RWw4, RWw5): Set a type of output to be performed (turning on the output or turning off the output)
here.
Output time setting Y0: 20:00, 7/24/2020, ON/OFF selection flag Y0: Turn on the output.
The output turns on at 20:00, July 24th, 2020.
(1) Synchronization cycle
(2) Input
(3) Operation
(4) Output
ON
OFF
Ó
Ò
(2) (3) (4)
(1)
ÔÔ
(2) (3) (4) (2) (3) (4) (2) (3) (4) (2) (3) (4)
Scan program
Synchronization
control interrupt
program
External output Y0
(Status of the Y0
terminal)
I/O module
To Next Page
Loading...
