11 TROUBLESHOOTING
11.1 CC-Link IE TSN/CC-Link IE Field Diagnostics
193
11
Checking station information
Information on I/O modules where data link is established are displayed in the "Station Information List" window.
Information on each I/O module, such as the production information, firmware version, and module inherent information, can
be checked by clicking the [Station Information List] button in the "CC-Link IE TSN/CC-Link IE Field Diagnostics" window.
The module inherent information shows the status of function setting switches of each I/O module.
When only the function setting switch 10 is on: The module inherent information is "0001".
When only the function setting switch 4 is on: The module inherent information is "0040".
For items displayed in the "Station Information List" window, refer to the following.
User's manual for the master station used
■Applicable version
The following table lists the firmware versions of I/O modules and the software versions of engineering tools that support the
station information display function.
Model Firmware version Software version
NZ2GN2S1-32D, NZ2GN2B1-32D, NZ2GN2S1-32T, NZ2GN2B1-
32T, NZ2GN2S1-32TE, NZ2GN2B1-32TE, NZ2GN2S1-32DT,
NZ2GN2B1-32DT, NZ2GN2S1-32DTE, NZ2GN2B1-32DTE,
NZ2GNCE3-32D, NZ2GNCE3-32DT, NZ2GNCF1-32D,
NZ2GNCF1-32T
"03" or later Version 1.065T or later
NZ2GN2S1-16D, NZ2GN2B1-16D, NZ2GN12A4-16D,
NZ2GN12A4-16DE, NZ2GN2S1-16T, NZ2GN2B1-16T,
NZ2GN12A2-16T, NZ2GN2S1-16TE, NZ2GN2B1-16TE,
NZ2GN12A2-16TE, NZ2GN12A42-16DT, NZ2GN12A42-16DTE
"05" or later Version 1.075D or later
To Next Page
Loading...
