─
83
─
These messages will be displayed when the unit is operated through IU
external input.
This does not indicate a failure; the message indicates that the unit is
operated through IU external input.
■
“In temporary stop mode”, “In forced thermostat OFF”, “In setting
temperature shift” displays
Menu
Direction
Cooling
16:32
(Mon)
F1: High power F2: Energy-saving
Timer
In temporary stop mode
Set temp
To notify any maintenance information related to the product, the
message “There is a information of maintenance. Check the content
from [Menu].” may be displayed in the message display.
When this message is displayed, tap the
Menu button. The
maintenance description will be displayed.
Contact the dealer/company shown as the Contact company (
☞
page
78) and notify the details (code) of required maintenance.
■
“There is a information of maintenance. Check the content from [Menu].” display
Menu
Direction
Heating
20:20 (Tue)
F1: High power F2: Energy-saving
Timer
There is a information of maintenance.
Check the content from [Menu].
Set temp
■
“OU silent operation by external input” display
Menu
Direction
Auto
16:00
(Mon)
F1: High power F2: Energy-saving
Timer
OU silent operation by external input
Set temp
MEETING1
Room
When “OU silent operation by external input” is displayed, the operation
performed will be the same as the silent mode control (
☞
page 69)
performed from the R/C.
During silent mode control, operation with maximum capacity is not
allowed.
The message “OU silent operation by external input” will be displayed when silent mode control is operated through a
central control device (not included) or an IO external input (not included).
To Next Page
Loading...
