Contral-l ever
---
= position(fuU1
=== = Contral-Iever
posi
tion (idle)
n----a'--_o--(
FIG
8 )
icIeIing
(
FIG
5)
-t-_..Y'\
(FlG9)
Stop (FIG
11
&
121
r.p.m.
Fig.
3
1. Starting
of
Engine
When the control-lever of
the
governor
is
removed
to
the starting position
(maximum-speed-stopper) by means
of
the hand-lever or pedals through the link, the bosses
of
the
swivel-lever which move together with the control-lever, will be separated from the
guide-lever, and
the
governor-spring, which
is
connected with
the
tension-lever,
is
stretched.
This governor-spring pulls the tension-lever
to
the place of full-load stopper. Then the shifter
and the guide-bush
act
on the left side and the weak start-spring will move
the
floating lever
so
as
to
transfer
the
control-rack of the injection pump
to
the starting point beyond the
position of
the
full-load. Thus the start of engine
will
be
easily yielded.
Ful-Ioae
Icing
STOP
Control-lever
STOP
Shifter & Guide
bush
Full-ioad-stopper
Fig. 4
Start
-
38-
To Next Page
Loading...
