PREFACE
1.
In
every new Model
40050
Engine, fuel injection pump and governor lever bear lead
seals
that
were
put
after their setting upon final confirmation of its performance through
test
runs,
at
our factory. This service manual
is
intended
to
cover regular maintenance
services. For informations
about
particular servicing, especially
of
sealed units and parts
such
as
mentioned above, please contact
our
service man
or
your
dealer.
2.
Engine name plate
is
found on the up-side
of
rocker case. Engine Model and No. are
given on it.
They are also stamped on
the
right. side
of
crankcase. They will serve as important data
to
know
the
engine's career and make-up of components.
Fig.
0-1
Stamped engine No.
Fig.
0-2 Service
meter
3. As for fuel, engine's power source, and lubricating
oil
to
smooth engine operation,
please use those are above
OM
class as shown
in
caution plate. Their choice has a
considerable influence on
the
engine's service life. Lubrication and other servicing
in
accordance with the instructions given herein will promise its most satisfactory operation.
For
regular service intervals are based on the reading
of
service meter,
don't
forget
to
read
it every day.
At
the
same time, check the day's fuel and oil consumptions. The data
collected
thus
every day
will
prove very useful
to
know later how
the
engine has been
running and
is
at
the time.
4.
We
hope
that,
along with this manual, you will make use
of
the
parts catalogue
to
deepen your knowledge about
the
handling
of
your engine.
-1-
To Next Page
Loading...
Need help?
General
