Mitsubishi FX2N User Manual

FX2N-32DP-IF Profibus-DP Interface Unit Advanced Devices 4
4-2
4.1.1 Example of Allocating Device
Figure 4.1:Example of Allocating Device
Note:
In configuring 32DP-IF GSD file, first assign special function blocks, second extension I/O
units/blocks’ input data, and finally extension I/O units/blocks’ output data. The physical
placement of the module does not have to correspond with the GSD file order.
Table 4.2:Example of Allocating Device
Device No. Description
D0 to D3 FX
2N
-4AD’s input data (BFM #5 ~ #8)
D4
Lower 8 bits FX
0N
-8ER-ES/UL’s X0 ~ X3 (bit 4 ~ 7 not used)
Higher 8 bits FX
2N
-16EX-ES/UL’s X10 ~ X17
D5
Lower 8 bits FX
2N
-16EX-ES/UL’s X20 ~ X27
Higher 8 bits
These devises area not used.
D6 ~ D99
D100 ~ D103 FX
2N
-4DA’s output data (BFM #1 ~ #4)
D104
Lower 8 bits FX
0N
-8ER-ES/UL’s Y0 ~ Y3 (bit 4 ~ 7 not used)
Higher 8 bits FX
0N
-8EYT-ESS/UL’s Y10 ~ Y17
D105 ~ D199 These devices are not used.
FX
2N
-
32DP-IF
FX
2N
-4AD
FX
0N
-8ER
-ES/UL
FX
2N
-4DA
FX
2N
-16EX
-ES/UL
FX
0N
-8EYT
-ESS/UL
X0 ~ X3
Y0 ~ Y3
X10 ~ X27
Y10 ~ Y17
Using Ch1 ~ Ch4
(average data)
Using Ch1 ~ Ch4

Mitsubishi FX2N Specifications

General

Type	PLC
Series	FX2N
Manufacturer	Mitsubishi Electric
Power Supply	100-240VAC or 24VDC
Program Capacity	8, 000 steps
I/O Points	Up to 256 points
Expansion	Yes, via expansion modules
Instruction Set	Basic and advanced instructions
Output Type	Relay or Transistor
Humidity	5 to 95% RH, non-condensing
Communication	RS-422, RS-485
Input Points	Up to 128 points
Output Points	Up to 128 points
Execution Speed	0.08 µs per instruction
Programming Language	Instruction List
Data Memory	8, 000 words
Operating Temperature	0 to 55°C
Storage Temperature	-20°C to 70°C