Mitsubishi MELDAS MDS-C1 - Appendix 1-2 Connector Outline Dimension Drawings

Appendix 1. Cable and Connector Specifications
A1 - 10
Appendix 1-2 Connector outline dimension drawings
Connector for CN2 Servo drive unit
Manufacturer: 3M (Ltd.)
<Type>
Connector: 10120-3000VE
Shell kit: 10320-52F0-008
[Unit: mm]
22.0
39.0
33.3
12.7
14.0
23.8
12.0
10.0
Manufacturer: 3M (Ltd.)
< Type >
Connector: 10120-3000VE
Shell kit: 10320-52A0-008
[Unit: mm]
22.0
39.0
33.3
23.8
12.7
14.0
12.0
10.0
Manufacturer: 3M (Ltd.)
< Type >
Connector: 10120-6000EL
Shell kit: 10320-3210-000
Because this connector is an
integrated molding part of the
cable, it is not an option
setting in the connector set.
The terminal connector
(A-TM) also has the same
outline.
[Unit: mm]
20.9
29.7
33.0
42.0
11.5