Appendix 3. EMC Installation Guidelines
A3 - 13
MX13 Series 3-phase high attenuation noise filter (for FA & servo system)
Features
• Perfect for mounting inside control panel:
New shape with uniform height and depth
dimensions
• Easy mounting and maintenance work:
Terminals are centrally located on the
front
• Complaint with NC servo and AC servo
noise:
High attenuation of 40dB at 150KHz
• Safety Standards:
UL1283, CSA22.2 No.8, EN133200
• Patent and design registration pending
Specifications and standards
Type
Item
MX13030 MX13050 MX13100 MX13150
1 Rated voltage (AC) 3-phase 250VAC (50/60Hz)
2
Rated current (AC) (Note)
30A 50A 100A 150A
3
Test voltage (AC for one minute across
terminal and case)
2500VAC (100mA) at 25°C, 70% RH
4
Insulation resistance (500VDC across
terminal and case)
100MΩ min. at 25°C, 70% RH
5 Leakage current (250V, 60Hz) 3.5 mA max. 8 mA max.
6 DC resistance
30 mΩ max. 11 mΩ max. 5.5 mΩ max. 3.5 mΩ max.
7 Temperature rise 30°C max
8 Working ambient temperature –25°C to +85°C
9 Working ambient humidity 30% to 95% RH (non condensing)
10 Storage ambient temperature –40°C to +85°C
11 Storage ambient humidity 10% to 95% RH (non condensing)
12 Weight (typ) 2.8kg 3.9kg 11.5kg 16kg
(Note) This is the value at Ta≤50°C.
Refer to the following output derating for Ta>50°C.
Output derating
Current (%)
mbient temperature Ta (°C)
Example of using MX13 Series
This is a noise filter with the same dimensions as
the general servo unit depth (200mm) and height
(380mm).
This unit can be laid out easily in the device by
arraigning it in a row with the servo unit.
As with the servo unit, the terminals are
arranged on the front enabling ideal wire
lead-out.
Refer to the following usage examples for
details.
To Next Page
Loading...
