Instruments and controls
3-11
3
System check screen
When the ignition switch is turned to the “ON” position, the
system check screen is displayed for about 4 seconds. If there
is no fault in the “Oil pressure warning display”, “Headlamp
(with beam position adjustment system) warning display (if so
equipped)”, this screen is displayed when the engine is “ON”.
Refer to “Oil pressure warning display” on page 3-55.
Refer to “Headlamps (with beam position adjustment system)
warning display” on page 3-62.
OTE
● The system check screen display varies depending on the
customer’s equipment.
Service reminder
When the time for periodic inspection arrives, “PERIODIC
INSPECTION” is displayed for a few seconds after the igni-
tion switch “ON” screen. Refer to “Service reminder” on page
3-8.
To Next Page
Loading...
