3-24
Instruments and controls
3
3. After your vehicle is inspected at an authorised MIT-
SUBISHI MOTORS dealer, it displays the time until the
next periodic inspection.
To reset
The “---” display can be reset while the ignition switch is
“OFF”. When the display is reset, the time until the next peri-
odic inspection is displayed and “PERIODIC INSPECTION”
is no longer displayed when the ignition switch is switched
from “OFF” to “ON”.
1. When you lightly press the multi-information meter
switch a few times, the information screen switches to the
service reminder display screen.
2. Press and hold the multi-information meter switch for
about 2 seconds or more to display “ ” and make it flash
(if there is no operation for about 10 seconds with flash-
ing, the display returns to the previous screen).
To Next Page
Loading...
