Instruments and controls
3-25
3
3. Lightly press the multi-information meter switch while
the icon is flashing to change the display from “---” to
“CLEAR”. After this, the time until the next periodic
inspection will be displayed.
OTE
● “---”display cannot be reset when the ignition switch is
“ON”.
● When “---” is displayed, after a certain distance and a cer-
tain period of time, the display is reset and the time until
the next periodic inspection is displayed.
● If you accidentally reset the display, we recommend you
to consult a MITSUBISHI MOTORS Authorised Service
Point.
CAUTION
!
● The customer is responsible for making sure that
periodic inspection and maintenance are performed.
Inspections and maintenance must be performed to
prevent accidents and malfunctions.
To Next Page
Loading...
