Mitsubishi Outlander 2007 - Page 181

3-30
Instruments and controls
3
Manual reset mode
• When the average fuel consumption and average speed
are being displayed, if you hold down the multi-infor-
mation meter switch, the average fuel consumption and
average speed displayed at that time are reset.
• When the ignition switch is switched from “ACC” or
“LOCK” to “ON”, the mode setting is automatically
switched from manual to auto.
Auto reset mode
• When the average fuel consumption and average speed
are being displayed, if you hold down the multi-infor-
mation meter switch, the average fuel consumption and
average speed displayed at that time are reset.
• If the ignition switch is at “ACC” or “LOCK” for about
4 hours or longer, the average fuel consumption display
and average speed display are automatically reset.
N
OTE
● The memory of the manual reset mode or auto reset mode
for the average speed display is erased if the battery is dis-
connected.
● The initial (default) setting is “Auto reset mode”.
Changing the fuel consumption display unit
E00523000016
The display unit for fuel consumption can be switched. The
distance, speed, and amount units are also switched to match
the selected fuel consumption unit.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing function settings” on page 3-27.
2. Lightly press the multi-information meter switch to select
“AVG UNIT (fuel consumption display setting)”.