Mitsubishi Outlander 2007 - Page 186

Instruments and controls
3-35
3
3. Press and hold the multi-information meter switch to
switch in sequence from A (language cooperation ena-
bled) → M (language cooperation disabled) → A (lan-
guage cooperation enabled).
The setting is changed to the selected condition.
N
OTE
● The memory of the language cooperative control is erased
if the battery is disconnected, and it returns automatically
to A (language cooperation enabled).
● The language display modified with the language setting
can be switched in the following manner.
• When A (language cooperation enabled) has been
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System
(MMCS) (if so equipped) or the Hands-free Bluetooth
®
(if so equipped) cellular phone interface system with
voice recognition* is automatically changed to the lan-
guage selected for the multi-information display.
• When M (language cooperation disabled) has been
selected with the language cooperative control, the lan-
guage for Mitsubishi Multi-Communication System
(MMCS) (if so equipped) or the Hands-free Bluetooth
®
(if so equipped) cellular phone interface system with
voice recognition* is not automatically changed to the
language selected for the multi-information display.
Operation sound setting
E00523400010
You can turn off the operation sounds of the multi-information
meter switch.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing function settings” on page 3-27.
2. Lightly press the multi-information meter switch to select
“ ” (operation sound setting). (Located on MENU 2/2).