Mitsubishi Outlander 2007 - Page 187

3-36
Instruments and controls
3
3. Press and hold the multi-information meter switch for
about 2 seconds or more to switch in sequence from ON
(operation sound on) ¨ OFF (operation sound off) ¨ ON
(operation sound on).
The setting is changed to the selected condition.
N
OTE
● The memory of the operation sound setting is erased if the
battery is disconnected, and it returns automatically to ON
(operation sound on).
● The operation sound setting only deactivates the operation
sound of the multi-information meter switch. The warning
display and other sounds cannot be deactivated.