3-38
Instruments and controls
3
5. Press and hold the multi-information meter switch for
about 2 seconds or more, the setting is changed to the
selected time.
OTE
● If the battery is disconnected, the unit setting is erased
from memory and is automatically set to OFF.
● The drive time is reset when the ignition switch is turned
off.
Returning to the factory settings
E00523600012
All of the function settings can be returned to their factory set-
tings.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing function settings” on page 3-27.
2. Lightly press the multi-information meter switch to select
“RESET” (returning to the factory settings) (located on
MENU 2/2).
To Next Page
Loading...
