3-68
Instruments and controls
3
Rear window wiper and washer
E00507300558
The rear window wiper and washer switch can be operated
with the ignition switch in the “ON” or “ACC” position.
OTE
● To ensure a clear rearward view, the wiper performs a
number of continuous operations either when the switch is
moved to the “INT” position or when the reverse gear is
engaged while the switch is in the “INT” position.
Following this continuous operation, the wiper will auto-
matically switch to intermittent operation.
● It is possible to activate the following functions. For fur-
ther information, we recommend you to consult a MIT-
SUBISHI MOTORS Authorised Service Point.
On vehicles equipped with Mitsubishi Multi-Communica-
tion System (MMCS), screen operations can be used to
make the adjustment. Refer to the separate owner’s man-
ual for details.
• Adjustment of the interval for intermittent operation
• Changing intermittent wiper operation to continuous
wiper operation
INT - The wiper operates continuously for several seconds then
operates intermittently at intervals of about every 8 sec-
onds
OFF - Off
-
The washer fluid will be sprayed onto the rear window
when the knob is turned fully in either direction.
The wipers operate automatically several times while the
washer fluid is being sprayed
To Next Page
Loading...
Need help?
General
