OTE
● A whining sound may be emitted from the engine com-
partment in the following situations. The sound is associ-
ated with checking the operations of the ASC. It does not
indicate a malfunction.
• When the ignition switch is set to the “ON” position.
• When the vehicle is driven for a while after the engine is
turned on.
● When the ASC is activated, you may feel a vibration in
the vehicle body or hear a whining sound from the engine
compartment.
This indicates that the system is operating normally. It
does not indicate a malfunction.
● When the anti-lock brake system warning lamp is illumi-
nated, the ASC is not active.
Traction control function
E00619000016
On slippery surfaces, the traction control function prevents the
drive wheels from spinning excessive, thus helping the vehicle
to start moving from a stopped condition. It also provides suffi-
cient driving force and steering performance as the vehicle
turns while pressing the acceleration pedal.
Stability control function
E00619100017
The stability control function is designed to help the driver
maintain control of the vehicle on slippery roads or during
rapid steering maneuvers. It works by controlling the engine
output and the brake on each wheel.
OTE
● The stability control function operates at speeds of about
15 km/h (9 mph) or higher.
“ASC OFF” switch
E00619200018
The ASC is automatically activated when the ignition switch is
turned to the “ON” position. You can deactivate the system by
pressing down the “ASC OFF” switch for 3 seconds or longer.
When the ASC is deactivated, the display will be illumi-
nated in the multi-information display. To reactivate the ASC,
momentarily press the “ASC OFF” switch; the display is
turned off.
CAUTION
!
● When driving a vehicle on a snowy or icy road, be
sure to install snow tyres and drive the vehicle at
moderate speeds.
To Next Page
Loading...
