OTE
● When moving out of mud, sand or fresh snow, pressing
the accelerator pedal may not allow the engine speed to
increase. In such situations, temporarily turning off the
ASC with the “ASC OFF” switch will make it easier to
move out your vehicle.
● Using the “ASC OFF” switch turns off both the stability
control function and the traction control function.
● If you continue to press the “ASC OFF” switch after the
ASC is turned off, the “mistaken operation protection
function” will activate and the ASC will turn back on.
After the “mistaken operation protection function” is acti-
vated, it will not be possible to turn the ASC off.
To turn the system off again, return the ignition switch to
the “ACC” or “LOCK” position, restart the engine and
press the “ASC OFF” switch.
ASC display, ASC OFF display
E00619300019
CAUTION
!
● For safety reasons, the “ASC OFF” switch should be
operated when your vehicle is stopped.
● Be sure to keep the ASC on while driving in normal
circumstances.
-
ASC display
When the ASC is operating, the information screen in the
multi-information display will change and the ASC dis-
play will blink.
-
ASC OFF display
This is displayed when the ASC has been deactivated
with the “ASC OFF” switch.
To Next Page
Loading...
