OTE
● While the engine coolant temperature is low, the tempera-
ture of the air from the heater will be cool/cold until the
engine warms up even if you have selected warm air with
the dial.
● When the temperature is set to the highest or the lowest
setting under the AUTO operation, the air selection and
the air conditioning will be automatically changed as fol-
lows.
• Quick Heating (When the temperature is set to the high-
est setting)
Outside air will be introduced and the air conditioning
will stop.
• Quick Cooling (When the temperature is set to the low-
est setting)
Inside air will be recirculated and the air conditioning
will operate.
The settings described above are the factory settings. The air
selection and air conditioning switches can be customised
(function setting changed), and the automatic switching of out-
side air and the air conditioning according to operating condi-
tions can be changed as desired.
For further information, we recommend you to consult a MIT-
SUBISHI MOTORS Authorised Service Point.
Refer to “Customising the air conditioning switch (Changing
function settings)” on page 5-12.
Refer to “Customising the air selection (Changing function set-
tings)” on page 5-10.
Air selection switch
E00703400348
To change the air selection, simply press the air selection
switch. There is a sound each time the switch is pressed.
● Outside air: Indicator lamp (A) is OFF
Outside air is introduced into the passenger compartment.
● Recirculated air: Indicator lamp (A) is ON
Air is recirculated inside the passenger compartment.
To Next Page
Loading...
