For emergencies
6-27
6
5. Remove the wheel nuts with the wheel nut wrench, then
take the wheel off.
6. Clean out any mud, etc. on the hub surface (F), hub bolts
(G) or in the installation holes (H) in the wheel, and then
mount the spare tyre.
● No one should be in your vehicle when using the
jack.
● Do not start or run the engine while your vehicle is
on the jack.
● Do not turn the raised wheel. The tyres still on the
ground could turn and make your vehicle fall off the
jack.
CAUTION
!
● Handle the wheel carefully when changing the tyre,
to avoid scratching the wheel surface.
WARNING
!
To Next Page
Loading...
