6-28
For emergencies
6
7. Turn the wheel nuts clockwise by hand to initially tighten
them.
[On vehicles with steel wheels]
• Normal wheel and compact spare wheels
Initially tighten the wheel nuts until the tapered part (A)
of the nuts lightly touches the wheel hole seats (B)
enough to keep the tyre from wobbling.
Initially tighten the nuts in the same way when mount-
ing the compact spare wheel.
WARNING
!
● Be sure to position the tyres the correct way when
putting them on the vehicle. The valves should be on
the outer side of the vehicle. If the valve (I) cannot
be seen, the tyre has been mounted the wrong way
around.
If tyres are mounted the wrong way around it could
have a negative effect on the vehicle and cause an
accident.
To Next Page
Loading...
