8-34
Maintenance
8
3. Referring to the fuse load capacity table, check the fuse
pertaining to the problem.
OTE
● If any system does not function but the fuse corresponding
to that system is normal, there may be a fault in the system
elsewhere. We recommend you to have your vehicle
checked.
4. Use the fuse puller to insert a new fuse with the same
capacity. Make sure you insert the fuse into the same loca-
tion in the fuse block.
B- Fuse is OK
C- Blown fuse
CAUTION
!
● If the newly inserted fuse blows again after a short
time, we recommend you to have the electrical sys-
tem checked to find the cause and rectify it.
● Never use a fuse with a larger capacity than speci-
fied or a substitute (such as a cable or foil). Doing so
could cause the circuit wires to overheat and create
a fire.
To Next Page
Loading...
