OTE
● If the engine is cold, the diesel preheat indicator lamp is
on for a longer time.
● When the engine has not been started within about 5 sec-
onds after the diesel preheat indicator lamp went out,
return the ignition key to the “LOCK” position. Then, turn
the key to the “ON” position to preheat the engine again.
● When the engine is warm, the diesel preheat indicator
lamp does not come on even if the ignition key is placed
in the “ON” position.
Start the engine by turning the ignition key right to the
“START” position.
6. Turn the emergency key to the “START” position without
depressing the accelerator pedal, and release it when the
engine starts.
OTE
● A ticking noise may be heard after starting the engine. this
is not an abnormal condition. The noise will disappear
after a short time of engine running.
If the ticking noise continues after the engine is warmed
up, please contact your authorized MITSUBISHI
MOTORS dealer.
Keyless entry system
E00307700013
Press the remote control switch, and all doors and the tailgate
will be locked or unlocked as desired. It is also possible to
operate the mirrors, electric window.
1-
LOCK ( ) switch
2-
UNLOCK ( ) switch
3- Indicator lamp
To Next Page
Loading...
Need help?
General
