Locking and unlocking
1-33
1
To lock
Press the LOCK switch (1). All the doors and the tailgate will
be locked. If the room lamp switch is in the middle position
(DOOR) at time, the room lamp and the turn-signal lamps will
blink once.
OTE
● With a vehicle that has a Dead Lock System, pressing the
Lock switch (1) two times in succession causes the Dead
Lock System to be set (refer to “Setting the system” on
page 1-40).
To unlock
Press the UNLOCK switch (2). All the doors and the tailgate
will be unlocked. If the room lamp switch is in the middle posi-
tion (DOOR) at this time, the room lamp will come on for
approximately 15 seconds and the turn-signal lamps will blink
twice.
OTE
● The indicator lamp (3) comes on each time a switch is
pressed.
● If the UNLOCK switch (2) is pressed and no door or tail-
gate is opened within approximately 30 seconds: relock-
ing will automatically occur.
● It is possible to modify functions as follows:
For further information, please contact your authorised
MITSUBISHI MOTORS dealer.
• The time from pressing of the UNLOCK switch (2) to
the moment of autmatic locking can be changed.
• The confirmation function (blinking of the turn-signal
lamps) can be set to operate only when the doors and
tailgate are locked or only when the doors and tailgate
are unlocked.
• The confirmation function (this indicates locking or
unlocking of the doors and tailgate with the blink of the
turn-signal lamps ) can be deactivated.
• The number of times the turn-signal lamps are blinked
by the confirmation function can be changed.
To Next Page
Loading...
Need help?
General
