Forward Collision Mitigation System (FCM) (if so equipped)
5-124 Features and controls
If the system becomes temporarily unavail-
able for some reason, the following message
may appear.
The indicator will appear on the informa-
tion screen of the multi-information display
and the FCM will automatically be turned off.
If the message continues showing, there is a
possibility that the FCM has a malfunction.
Contact an authorized Mitsubishi Motors
dealer for inspection of the system.
If the system becomes temporarily unavail-
able due to the high or low temperature of the
sensor, the following message will appear.
The indicator will appear on the informa-
tion screen of the multi-information display
and the FCM will automatically be turned off.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
If the message continues showing, there is a
possibility that the FCM has a malfunction.
Contact an authorized Mitsubishi Motors
dealer for inspection of the sensor.
If the FCM detects a malfunction in the sys-
tem, either of the following messages will
appear, the indicator will appear on the
information screen of the multi-information
display and the FCM will automatically be
turned off.
If the message remains even after the opera-
tion mode is put in “OFF” and then turned
back to “ON”, please contact your authorized
Mitsubishi Motors dealer.
The “DRIVER ASSISTANCE CAMERA
BLOCKED” message may appear on the
information screen when driving on a non-
busy road with a few vehicles and obstacles
in front.
BK0239700US.book 124 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
