Mitsubishi Outlander 2017 - Page 258

Multi Information display - Type 1
Features and controls 5-177
5
[When the ignition switch is turned to the
“OFF” or “LOCK” position or the operation
mode is put in OFF]
The display shows the overall ECO score the
function has counted from the time when the
ignition switch is turned to the “ON” position
to the time when it is turned to the “OFF” or
“LOCK” or “ACC” position, or from the time
when the operation mode is set to “ON” to
the time when it is set to “OFF”.
N00556801270
1. Park your vehicle in a safe place.
Firmly apply the parking brake and move
the selector lever into the “P” (PARK)
position.
2. When you lightly press the multi informa-
tion meter switch, the information screen
switches to the function setting screen.
Refer to “Information screen” on page
5-169.
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
4. Select the item to change on the menu
screen and change to the desired setting.
For further details on the operation meth-
ods, refer to the following sections.
Refer to “Changing the reset mode for
average fuel consumption and average
speed” on page 5-178.
Refer to “Changing the fuel consumption
display unit” on page 5-179.
Refer to “Changing the temperature unit”
on page 5-180.
Refer to “Changing the display language”
on page 5-180.
Refer to “Changing the language on other
system to match the multi information
display” on page 5-181.
Refer to “Operation sound setting” on
page 5-181.
Changing the function settings
ECO drive level
Low High
CAUTION
 For safety, stop the vehicle before operating.
While driving, even if you operate the multi
information display switch, the function set-
ting screen is not displayed.
NOTE
 To return the menu screen to the function set-
ting screen, press and hold the multi infor-
mation display switch (for about 2 seconds
or more).
 If no operations are made within about 30
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
BK0239700US.book 177 ページ ２０１６年６月１６日 木曜日 午前１０時５８分