EasyManua.ls Logo

Mitsubishi Outlander 2017 - Page 259

Mitsubishi Outlander 2017
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Multi Information display - Type 1
5-178 Features and controls
5
Refer to “Changing the time until “REST
REMINDER” is displayed” on page
5-182.
Refer to “Changing the turn signal sound”
on page 5-182.
Refer to “Changing the momentary fuel
consumption display” on page 5-182.
Refer to “Tire ID set change” on page
5-146.
Refer to “Returning to the factory set-
tings” on page 5-183.
N00557001240
You can change the mode condition for the
average fuel consumption and average speed
display to “Auto reset” or “Manual reset.”
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-177.
2. Lightly press the multi information dis-
play switch to select “AVG” (average fuel
consumption and average speed setting).
3. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch in sequence from A or 1 (Auto
reset) M, 2 or P (Manual reset) A or
1 (Auto reset).
The setting is changed to the selected
reset condition.
If you press and hold the multi informa-
tion meter switch when the average fuel
consumption and average speed are dis-
played, these calculations will be reset to
zero.
When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC”, “LOCK” or “OFF”
position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
When the average fuel consumption and
average speed are being displayed, if you
hold down the multi information display
switch, these calculations will be reset to
zero.
NOTE
If the battery is disconnected, these function
settings are reset from memory and is auto-
matically to the factory settings (except the
tire ID set).
You cannot select an item that is displayed
dimly on the menu.
Changing the reset mode for aver-
age fuel consumption and average
speed
Manual reset mode
Auto reset mode
BK0239700US.book 178 ージ 2016年6月16日 木曜日 午前10時58

Table of Contents

Related product manuals