Dual-zone automatic climate control air conditioner
7-6 Comfort controls
N00736901206
Press of the blower speed selection
switch to increase the blower speed.
Press of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
9- Electric rear window defogger switch
P.5-237
10- OFF switch
11- Driver’s side temperature display
P.7-7
12- DUAL indicator
13- Mode selection display
14- Passenger’s side temperature display
P.7-7
15- Air conditioning indicator
16- Blower speed display
There is an interior air temperature sensor
(A) in the illustrated position.
Never place anything over the sensor, since
doing so will prevent it from functioning
properly.
Since the air conditioning operation is con-
trolled while the ECO mode is operating,
you may feel that effectiveness of the air
conditioner is insufficient.
ECO mode switch P.5-231
Even during ECO mode operation, you can
select normal operation of the air condi-
tioner.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to change the setting. Refer to
the separate owner’s manual for details.
In extreme cold, the air conditioning control
panel screen may operate sluggishly. This
does not indicate a problem.
It will disappear when the vehicle interior
temperature rises to a normal temperature.
Blower speed selection switch
1- Increase
2- Decrease
BK0239700US.book 6 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
