- 16 -
6. PROPER SEWING
6-1 Operation of the halt switch
If an incident such as a thread breakage, needle breakage and any other incidents are happened during
the sewing operation, please hit immediately the halt switch. The sewing machine running is stopped
instantly.
CAUTION
★Before start the sewing operation, please make sure the location of the halt switch and keep it in
mind the function and how to use it.
★Please keep away the hands and the face from the needle during the sewing operation.
1) Press the HALT switch (No.1). All operations will stop, and the sewing machine will stop at the needle
UP state without trimming the thread.
2) Remove the cause of the abnormality.
3) To continue sewing, turn the HALT switch (No.1) to the right, and unlock the switch.
Next, when the start switch (No.3) (gray foot switch) is pressed again, the operation will resume from
the halted position.
4) To cancel sewing, turn the HALT switch (No.1) to the right, and unlock the switch.
Then, press the
key on the operation panel (No.2).
The work holder (No.4) will return to the home position from the stopped position and will stop.
3)
4)
1)
2)
To Next Page
Loading...
Need help?
General
