Mitsubishi Q01CPU User Manual

12 - 58
12.3 Error Code List
12.3.3 Error code list (1000 to 1999)
12
TROUBLESHOOTING
1010
END NOT
EXECUTE
– – Off Flicker Stop
When an END
instruction
executed
1020
SFCP. END
ERROR
– – Off Flicker Stop
When SFC
program is
executed
1035
MAIN CPU
DOWN
– – Off Flicker Stop Always
Error
Code
(SD0)
Error
Message
Common
Information
(SD5 to 15)
Individual
Information
(SD16 to 26)
LED Status CPU
Operation
Status
Diagnostic
Timing
RUN ERROR
*1 CPU operation can be set in the parameters at error occurrence. (LED indication varies.)
*2 In the QCPU except for remote I/ O module, either error stop or continue can be selected for each intelligent function module by the parameters.
*3 BAT.ALM LED is displayed at BATTERY ERROR.

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English