Mitsubishi Q01CPU User Manual

12 - 74
12.3 Error Code List
12.3.3 Error code list (1000 to 1999)
12
TROUBLESHOOTING
1401
SP. UNIT
DOWN
Module No.
(Slot No.)
–
Off/
On
Flicker/
On
Stop/
Continue
*2
At power ON/
At reset/When
intelligent
function
module is
accessed
Off Flicker
Stop
*2
At power ON/
At reset
1402
SP. UNIT
DOWN
Module No.
(Slot No.)
Program error
location
Off/
On
Flicker/
On
Stop/
Continue
*2
When an
intelligent
function
module access
instruction is
executed
Off Flicker Stop
During
execution of
FROM/TO
instruction set
Error
Code
(SD0)
Error
Message
Common
Information
(SD5 to 15)
Individual
Information
(SD16 to 26)
LED Status CPU
Operation
Status
Diagnostic
Timing
RUN ERROR
*1 CPU operation can be set in the parameters at error occurrence. (LED indication varies.)
*2 In the QCPU except for remote I/ O module, either error stop or continue can be selected for each intelligent function module by the parameters.
*3 BAT.ALM LED is displayed at BATTERY ERROR.

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English