1 - 2
1 OVERVIEW
REMARK
For information about the each module, design method for program and parameter,
refer to the following manuals.
Item Reference Manual
PLC CPU area, peripheral devices for PLC program design,
I/O modules and intelligent function module
MELSEC-Q series PLC Manuals,
Manual relevant to each module
Operation method for MT Developer2 Help of each software
SV13/SV22
• Multiple CPU system configuration
• Performance specification
• Design method for common parameter
• Auxiliary and applied functions (common)
Q173DCPU/Q172DCPU Motion controller
Programming Manual (COMMON)
• Design method for Motion SFC program
• Design method for Motion SFC parameter
• Motion dedicated PLC instruction
Q173DCPU/Q172DCPU Motion controller (SV13/SV22)
Programming Manual (Motion SFC)
SV13/SV22
• Design method for positioning control
program in the real mode
• Design method for positioning control
parameter
Q173DCPU/Q172DCPU Motion controller (SV13/SV22)
Programming Manual (REAL MODE)
SV22
(Virtual mode)
• Design method for mechanical system
program
Q173DCPU/Q172DCPU Motion controller (SV22)
Programming Manual (VIRTUAL MODE)
To Next Page
Loading...
Need help?
General
