Mitsubishi Q62AD-DGH - 4.6.1 Offset;gain settings (Q64 AD-GH)

4 - 11 4 - 11
MELSEC-Q
4 SETUP AND PROCEDURES BEFORE OPERATION
4.6 Offset/Gain Settings
When using the user range setting, make the offset/gain setting according to the
operation indicated in Section 4.6.1 or Section 4.6.2.
When the industrial shipment setting is used, offset/gain setting is not necessary.
If the utility package is installed, perform the offset/gain settings according to the
procedure described in Section 5.6.2.
4.6.1 Offset/gain settings (Q64AD-GH)
(1) Offset/gain setting procedure