5 - 18 5 - 18
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AD)
5.6 Monitoring/Test
5.6.1 Monitor/test screen
[Purpose]
Buffer memory monitoring/testing, I/O signals monitoring/testing, operating condition
setting, offset/gain settings (see Section 5.6.2) and pass data (see Section 5.6.3,
5.6.4) are started from this screen.
[Operating procedure]
"Select monitor/test module" screen "Start I/O No.
1
" "Module type"
"Module model name"
Monitor/test
1: Enter the start I/O No. in hexadecimal.
The screen can also be started from System monitor of GX Developer
Version 6 or later.
Refer to the GX Developer Operating Manual for details.
[Setting screen]
To Next Page
Loading...
