Mitsubishi Q62AD-DGH - 4 SETUP AND PROCEDURES BEFORE OPERATION

4 - 21 4 - 21
MELSEC-Q
4 SETUP AND PROCEDURES BEFORE OPERATION
4.6.3 A/D conversion value storage during offset/gain setting
If during the offset/gain setting, the A/D conversion values are stored into the buffer
memory addresses 11 to 14, 54 to 61 (Un\G11 to Un\G14, Un\G54 to Un\G61) as in
the normal mode.
(1) Q64AD-GH
The A/D conversion values of all channels are stored into the buffer memory.
(2) Q62AD-DGH
The A/D conversion values of the channels specified in the offset/gain setting
mode (buffer memory addresses 22, 23: Un\G22, Un\G23) are stored into the
buffer memory.