5 - 12 5 - 12
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-AD)
POINT
The <<FB support parameter>> tab is displayed when the project which is being
edited is a label project.
(2) Command buttons
Common operations to the <<Intelligent function module parameter>> tab and
<<FB support parameter>> tab
Delete
Deletes the initial setting and auto refresh setting of the selected
module.
However, if initial setting and auto refresh setting have been
prepared and the cell of "Initial setting" or "Auto refresh setting"
is selected and executed, only the setting of the selected cell is
deleted.
Exit
Closes this screen.
When the <<FB support parameter>> tab is selected
<<Parameter
Moves the setting of the selected line to the <<Intelligent
function module parameter>> tab.
When the <<Intelligent Function Module Parameter>> tab is selected
FB parameter>>
Moves the setting of the selected line to the <<FB support
parameter>> tab.
(3) Menu bar
(a) File menu
Intelligent function module parameters of the project opened by GX
Developer are handled.
[Open parameters]: Reads a parameter file.
[Close parameters]: Closes the parameter file. If any data are
modified, a dialog asking for file saving will
appear.
[Save parameters]: Saves the parameter file.
[Delete parameters]: Deletes the parameter file.
[Open FB support parameters]: Opens the FB support parameter file.
[Save as FB support parameters]: Saves the FB support parameter file.
[Exit]: Closes this screen.
(b) Online menu
[Monitor/Test]: Activates the Select monitor/test module screen.
[Read from PLC]: Reads intelligent function module parameters from the
CPU module.
[Write to PLC]: Writes intelligent function module parameters to the
CPU module.
To Next Page
Loading...
