1 - 3 1 - 3
MELSEC-Q
1 OVERVIEW
(12) Offset/gain setting
GX Configurator-AD, dedicated instruction (G(P). OFFGAN) or mode switching
setting allows a shift to the offset/gain setting mode easily.
(13) Easy configuration with GX Configurator-AD
GX Configurator-AD, which is sold separately, allows the configuration of an A/D
converter module on its screen, thus resulting in a reduction of sequence
programs.
The setting status and operating status of the modules can be checked easily.
FB
1
can be generated automatically from the intelligent function module
parameters that have been set up, and is available in a sequence program.
1: FB is the function for making a circuit block used in a sequence program
repeatedly a part (FB) to use it in the sequence program.
This function can improve the efficiency of program development and
minimize program bugs to improve program qualities.
For the details of FB, refer to "GX Developer Version 8 Operating Manual
(Function Block)."
To Next Page
Loading...
