2 - 2 2 - 2
MELSEC-Q
2 SYSTEM CONFIGURATION
(3) Compatibility with online module change
The A/D conversion module is configured for function version C by default, and
supports online module change.
For the procedure of online module change, refer to Chapter 7.
(4) Q64AD-GH compatible software packages
Relation between the system containing the Q64AD-GH and software package is
shown in the following table.
GX Developer or GX Works2 is necessary when using the Q64AD-GH.
Software Version
GX Developer
GX Configurator-AD
1
GX Works2
Q00J/Q00/Q01CPU
Single CPU system Version 7 or later
Version 1.14Q or later
Refer to GX Works2
Operating Manual
(Common).
Multiple CPU system Version 8 or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Single CPU system Version 4 or later
Multiple CPU system Version 6 or later
Q02PH/Q06PHCPU
Single CPU system
Version 8.68W or later
Multiple CPU system
Q12PH/Q25PHCPU
Single CPU system
Version 7.10L or later
Multiple CPU system
Q12PRH/
Q25PRHCPU
Redundant CPU
system
Version 8.45X or later Version 1.15R or later
Q00UJ/Q00U/Q01U
CPU
Single CPU system
Version 8.76E or later
Version 2.09K or later
Multiple CPU system
Q02U/Q03UD/
Q04UDH/
Q06UDHCPU
Single CPU system
Version 8.48A or later
Multiple CPU system
Q10UDH/Q20UDHC
PU
Single CPU system
Version 8.76E or later
Multiple CPU system
Q13UDH/Q26UDH
CPU
Single CPU system
Version 8.62Q or later
Multiple CPU system
Q03UDE/Q04UDEH/
Q06UDEH/
Q13UDEH/
Q26UDEHCPU
Single CPU system
Version 8.68W or later
Multiple CPU system
Q10UDEH/Q20UDE
HCPU
Single CPU system
Version 8.76E or later
Multiple CPU system
CPU modules other
than the above
Single CPU system
Not supported Not supported
Multiple CPU system
If installed in a MELSECNET/H remote I/O
station
Version 6 or later Version 1.14Q or later
1: When using the pass data, use the product of Version 1.16S or later.
2
To Next Page
Loading...
