Mitsubishi Q62AD-DGH - Page 225

APP -5 APP -5
MELSEC-Q
APPENDIX
Control data
1
of Q64AD-GH (2/2)
Device Item Set data Setting range Set by
(S) + 12
CH3 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 13
(S) + 14
CH3 Industrial shipment settings gain value (L)
(H)
— — System
(S) + 15
(S) + 16
CH4 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 17
(S) + 18
CH4 Industrial shipment settings gain value (L)
(H)
— — System
(S) + 19
(S) + 20
CH1 user range settings offset value (L)
(H)
— — System
(S) + 21
(S) + 22
CH1 user range settings gain value (L)
(H)
— — System
(S) + 23
(S) + 24
CH2 user range settings offset value (L)
(H)
— — System
(S) + 25
(S) + 26
CH2 user range settings gain value (L)
(H)
— — System
(S) + 27
(S) + 28
CH3 user range settings offset value (L)
(H)
— — System
(S) + 29
(S) + 30
CH3 user range settings gain value (L)
(H)
— — System
(S) + 31
(S) + 32
CH4 user range settings offset value (L)
(H)
— — System
(S) + 33
(S) + 34
CH4 user range settings gain value (L)
(H)
— — System
(S) + 35
1 Set only the pass data classification setting (S)+2. If data is written to the area set by the system, the offset/gain values
will not be read properly.
Control data
2
of Q62AD-DGH (1/2)
Device Item Set data Setting range Set by
(S) System area — — —
(S) + 1 Completion status
Stores the status when the
instruction is complete.
0 : Normal completion
Other than 0: Abnormal completion
— System
(S) + 2
System area — — —
(S) + 3
(S) + 4
CH1 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 5
(S) + 6
CH1 Industrial shipment settings gain value (L)
(H)
— — System
(S) + 7
(S) + 8
CH2 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 9
(S) + 10
CH2 Industrial shipment settings gain value (L)
(H)
— — System
(S) + 11
(S) + 12
System area — — —
to
(S) + 19
2 Setting is not necessary. If setting is made, the offset/gain values will not be read properly.