2 - 6 2 - 6
MELSEC-Q
2 SYSTEM CONFIGURATION
2.3 How to Check the Function Version, Serial Number, Product Information and Software
Version
(1) Checking the function version and serial number
The function version and serial number of the A/D converter module can be
checked on the rating plate and the front of the module, as well as the system
monitor of GX Developer.
(a) Check on the rating plate
The rating plate is located on the side of the A/D converter module.
(b) Check on the front of the module
The figure below shows where the function version and serial number
inscribed on the front of the module (lower part) are located.
To Next Page
Loading...
