Mitsubishi QJ71C24N - Page 200

7 - 23 7 - 23
MELSEC-Q
7 DATA COMMUNICATION USING THE BIDIRECTIONAL PROTOCOL
(2) Confirmation using the module and GX Configurator-SC
1) Confirmation using the display LED
When the Q series C24 detects an error, including a reception error, the ERR
LED lights up. (See Chapter 11.)
2) Confirmation using GX Configurator-SC
• The monitor function is used to check for errors. (See Sections 9.6.3 and
9.6.6.)
• The ERR LED is turned off with the ERR LED OFF function. (See Section
9.6.11.)
3) Confirming the error code
Use one of the following to confirm the error code.
• GX Configurator-SC monitor function (See Section 9.6.6.)
• GX Developer buffer memory monitor function (monitors addresses
257
H/267H)