2 - 17 2 - 17
MELSEC-Q
2 SYSTEM CONFIGURATION AND AVAILABLE FUNCTIONS
2.7 Use with C Controller Module
This section describes how the Q series C24 is used with a C Controller module.
When using the Q series C24 with a QCPU, please skip this section.
(1) Available functions, parameter setting, and use of interrupt
programs
For details, refer to the C Controller Module User's Manual, (Hardware Design,
Function Explanation).
(2) Access from GX Developer to a programmable controller CPU on
another station.
A programmable controller CPU on another station is not accessible via the Q
series C24 controlled by a C Controller module.
For details, refer to the C Controller Module User's Manual, (Hardware Design,
Function Explanation).
To Next Page
Loading...
