Mitsubishi QJ71C24N - Pre-Defined Protocol System Setting

8 - 5 8 - 5
MELSEC-Q
8 DATA COMMUNICATION USING THE PRE-DEFINED PROTOCOL
8.1.2 Pre-defined protocol system setting
In the "Pre-defined protocol system setting" window of GX Configurator-SC (Intelligent
function module utility), register the system setting value for data communication with
the pre-defined protocol.
For information on how to display the setting screen, refer to Section 9.4.9.
[Setting screen]
[Setting item]
Item Description
Execution log options
The condition for registering protocol execution logs can be specified.
Error logs : Failed protocol execution logs are stored.
All logs : The execution status and log of all protocols are stored.
[Setting procedure]
1) Select "Error logs" or "All logs" for "Execution log options".
2) Click Close
.
POINT
For information on the stored logs, refer to Section 8.1.4.